#How to connect to ethernet mac how to#
#How to connect to ethernet mac mac os#

Wait for the connection to establish, and then check to see if your Mac has access to the internet. Connect the other end of the cable to your Mac or your adapter. Connect an Ethernet cable to your router.

#How to connect to ethernet mac how to#

We have done this and added the following code to our board. A wireless router is the hub of a home network. HereвЂ™s how to connect a router to a Mac: Check to see if your Mac has an Ethernet port and connect an adapter if it only has USB ports.

#How to connect to ethernet mac mac os#

I believe we have to use the FIXED_PHY configuration option and provide it with an initialisation structure to allow Linux to use the network interface. This connects to the ethernet port and is configured via its internal web server as far as the Mac is concerned, itвЂ™s just connected to a regular ethernet network, but the adapter is actually. On Mac OS X, the other option is to open System Preferences (under the Apple menu) and open the Network pane. The switch's registers also report that the port is up and running at 125MHz RGMII. We have been unable to so far to use this interface in either U-Boot or Embedded Linux (Yocto build using fsl-community) despite the switch functioning: we can see it attempting to write packets to the iMX6 at 125MHz but receiving nothing back, not even at reset time. From the Connection list on the left, click Ethernet. Click the Network icon (under Internet & Network). Follow these steps on each Mac running OS X that you want to connect to the network: Click the System Preferences icon in the Dock.

Our iMX6Q's Ethernet MAC is directly connected to the switch's port 5 MAC via RGMII with 6 nets in each direction: CLK, CTL and D. For these instructions, it is assumed youвЂ™re connecting to a network with an Internet router or switch that includes a DHCP server. We have a custom iMX6-based board which includes a Marvell 6350R switch. Assign a Static IP Address to Mac or Windows PC Go to System Preferences -> Network Select the Ethernet port or External USB Ethernet Adapter Change.